Solar Energy - A pathway to a better tomorrow!



India has been the most active in promoting solar energy as a primary source of electricity. However, one of the most caring things industries can do to protect the environment's future is to use environmentally friendly products. Many people have resorted to solar power solutions through companies like Thermax Global in all of their manufacturing activities.


Solar energy is currently used in a range of vital tasks, including air conditioning, electric power, and machine fueling, all of which are accomplished through the employment of solar panels. By 2030, the country aims to have 450 GW of installed renewable energy capacity, with solar accounting for around 280 GW (almost 60 percent ). The graph below depicts the increasing demand for solar energy!


Now, if you're working on a solar PV installation, you'll need a handbook that will tell you everything you need to know about the dos and don'ts. So, here's everything you need to know about solar PV in India:


Pre-installation Checks - Everything You Need to Know Before You Begin


Because installing solar panels necessitates concentration, it's best to go over everything before getting started. Ensure you have enough wiring, a toolbox, junction boxes, splicing equipment, and everything else you could need for a successful installation.


Examine your shipment to ensure no products are missing or damaged.


Before you begin, double-check everything in the package and the system. Your solar PV installation will come to a halt if any parts are damaged or missing.


Select the appropriate mount. Pole, Roof-ground, and Flush mounts are the three types of mounts available. Each one will assist you in setting up in a specific location.


Before beginning your solar PV installation, remove any sunlight barriers, such as branches, that may be blocking sunlight to your solar unit.


Use the proper equipment and remember to take breaks to avoid becoming fatigued. Wear eye protection, gloves, and closed-toe boots at all times.


Keep a multimeter on hand at all times. Check for zero volts on the cables and terminators before proceeding.


Spend some time reading the manufacturer's solar PV installation guide before you start. Then, use the instructions to make a to-do list. Working through each activity will help you organise your equipment, hardware, and tools.


The above mentioned tips are simple to follow yet essential. If you are finding it challenging to understand, consult with experts like Thermax and get your pv solar installation done today. 

Comments

Post a Comment

Popular posts from this blog

What are Bi-Drum Boilers? How Do They Work?

Image
Bi-drum boilers are used for purposes of power generation and as process steam generators. This type of boiler is used up to 100MW for generating power. Bi-drum boilers are non-reheat units which are getting wiped out due to high heat rate of the plant. These boilers are used for generating high steam pressure which is used for power generation owing to their ability to accommodate high load of fluctuation and respond to load changes with more agility compared a single drum boiler. The two drums in the bi-drum boiler are connected using a large number of convective heat transfer tubes known as bank tubes or boiler bank tubes. These tubes are about one thousand in number. The bank tubes and the drum at the bottom that contains water will have a water level that will be up to the normal working level of water in the upper drum. The water availability in the bi-drum boiler makes it very adoptable for large load changes. Flue gases enter the bank tubes which are placed towards t...
Read more

How Do Electrostatic Precipitators Work?

Image
Reducing air pollutants is vital for human health and the health of the environment. Poor air quality has harmful effects on human health, particularly the respiratory and cardiovascular systems. Pollutants also damage plants and buildings, and smoke or haze can reduce visibility. Industries are largely responsible for causing pollution. They are also the ones who have access to a number of pollution control devices that absorb, filter, dilute, and disperse pollutants. One such device for pollution control is the electrostatic precipitator. This device works by removing particles and smoke from a gas stream using an electrostatic charge. Dust particles travel past wires that have a high direct current (DC) voltage applied, which ionises the surrounding gas. This corona discharge causes the particles to pick up a small electrostatic charge, without impeding the gas flow. Originally designed for recovery of valuable industrial-process materials, electrostatic precipitators are used a...
Read more

Quick overview of the Import & Export of Chemicals in India

Image
The chemical industry in India offers building blocks and essential raw materials for numerous industries such as paints, paper, textiles, pharmaceuticals, agrochemicals, soap, and detergents, etc. Let’s go through a few statistics of the chemical industry: The chemical industry in India is ranked 4th in Asia and 6th in the world. The global chemical industry is expected to be worth $4.7 trillion. The chemical companies in India contributes 3.4% to the global chemical industry. As of 2018, the chemical industry (including pharmaceuticals and fertilizers) stood at $163 billion. The Chemical sector in India is expected to grow at 9% per annum to reach $304 Bn by FY 2025. The expansion is anticipated to be pushed by rising demand in end-use segments for Specialty Chemicals and also for petrochemical intermediates. In 2015-16, the Chemical and Chemical Products sector accounted for 2.39percent of the GVA, compared to 2.23percent in 2014-15.18 Note: With India possessing a l...
Read more